 |
A Photoelectric Sensor consists primarily of an Emitter for emitting light and a Receiver for receiving light. When emitted light is interrupted or reflected by the sensing object, it changes the amount of light that arrives at the Receiver. The Receiver detects this change and converts it to an electrical output. The light source for the majority of Photoelectric Sensors is infrared or visible light (generally red, or green/blue for identifying colors).
Structural category Photoelectric switch | ||||
Outward Appearance code | G70 | |||
Outward appearance illustration |
| |||
| | |||
Diffuse Type | DETECTION DISTANCE | 20cm-100cm | ||
NPN | NO | G70-3A20NA | ||
DC | NC | G70-3A20NB | ||
10 | NO+NC | G70-3A20NC | ||
～ | PNP | NO | G70-3A20PA | |
30 | NC | G70-3A20PB | ||
V | NO+NC | G70-3A20PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Retro reflictive | DETECTION DISTANCE | 3m | ||
NPN | NO | G70-3B2NA | ||
DC | NC | G70-3B2NB | ||
10 | NO+NC | G70-3B2NC | ||
～ | PNP | NO | G70-3B2PA | |
30 | NC | G70-3B2PB | ||
V | NO+NC | G70-3B2PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Trough beam | DETECTION DISTANCE | 5m | ||
NPN | NO | G70-3C5NA | ||
DC | NC | G70-3C5NB | ||
10 | NO+NC | G70-3C5NC | ||
～ | PNP | NO | G70-3C5PA | |
30 | NC | G70-3C5PB | ||
V | NO+NC | G70-3C5PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
DC/SCR/Relay Control output | DC:200mA 、AC:300mA relay:2A | |||
DC/AC Consumption current | DC<15mA AC<10mA | |||
DC/AC Response time | DC<2ms AC<20ms | |||
Directional angle | 3°–10° | |||
Detected object | transparent of opaque body | |||
Working environment temperature | –25℃～55℃ | |||
Intensity of illumination of working environment | Sunlight under 10000LX incandescent lamp under 3000LX | |||
Shell material | Plastic | |||
Protection grade | IP54 | |||
A Photoelectric Sensor consists primarily of an Emitter for emitting light and a Receiver for receiving light. When emitted light is interrupted or reflected by the sensing object, it changes the amount of light that arrives at the Receiver. The Receiver detects this change and converts it to an electrical output. The light source for the majority of Photoelectric Sensors is infrared or visible light (generally red, or green/blue for identifying colors).
Structural category Photoelectric switch | ||||
Outward Appearance code | G70 | |||
Outward appearance illustration |
| |||
| | |||
Diffuse Type | DETECTION DISTANCE | 20cm-100cm | ||
NPN | NO | G70-3A20NA | ||
DC | NC | G70-3A20NB | ||
10 | NO+NC | G70-3A20NC | ||
～ | PNP | NO | G70-3A20PA | |
30 | NC | G70-3A20PB | ||
V | NO+NC | G70-3A20PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Retro reflictive | DETECTION DISTANCE | 3m | ||
NPN | NO | G70-3B2NA | ||
DC | NC | G70-3B2NB | ||
10 | NO+NC | G70-3B2NC | ||
～ | PNP | NO | G70-3B2PA | |
30 | NC | G70-3B2PB | ||
V | NO+NC | G70-3B2PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Trough beam | DETECTION DISTANCE | 5m | ||
NPN | NO | G70-3C5NA | ||
DC | NC | G70-3C5NB | ||
10 | NO+NC | G70-3C5NC | ||
～ | PNP | NO | G70-3C5PA | |
30 | NC | G70-3C5PB | ||
V | NO+NC | G70-3C5PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
DC/SCR/Relay Control output | DC:200mA 、AC:300mA relay:2A | |||
DC/AC Consumption current | DC<15mA AC<10mA | |||
DC/AC Response time | DC<2ms AC<20ms | |||
Directional angle | 3°–10° | |||
Detected object | transparent of opaque body | |||
Working environment temperature | –25℃～55℃ | |||
Intensity of illumination of working environment | Sunlight under 10000LX incandescent lamp under 3000LX | |||
Shell material | Plastic | |||
Protection grade | IP54 | |||
