 |
G13
USYUMO
| Quantity: | |
|---|---|
Trough Beam Diffuse reflection Retroreflective 3m Proximity Photoelectric Sensor G13
Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver.
Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object.
Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light.
Structural category Photoelectric switch | ||||
Outward Appearance code | G13 | |||
Outward appearance illustration |
| |||
Diffuse Type | DETECTION DISTANCE | 10cm | ||
NPN | NO | G13-3A10NA | ||
DC | NC | G13-3A10NB | ||
10 | NO+NC | G13-3A10NC | ||
～ | PNP | NO | G13-3A10PA | |
30 | NC | G13-3A10PB | ||
V | NO+NC | G13-3A10PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Retro reflictive | DETECTION DISTANCE | 1m | ||
NPN | NO | G13-3B1NA | ||
DC | NC | G13-3B1NB | ||
10 | NO+NC | G13-3B1NC | ||
～ | PNP | NO | G13-3B1PA | |
30 | NC | G13-3B1PB | ||
V | NO+NC | G13-3B1PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Trough beam | DETECTION DISTANCE | 3m | ||
NPN | NO | G13-3C3NA | ||
DC | NC | G13-3C3NB | ||
10 | NO+NC | G13-3C3NC | ||
～ | PNP | NO | G13-3C3PA | |
30 | NC | G13-3C3PB | ||
V | NO+NC | G13-3C3PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
DC/SCR/Relay Control output | DC:200mA 、AC:300mA relay:2A | |||
DC/AC Consumption current | DC<15mA AC<10mA | |||
DC/AC Response time | DC<2ms AC<20ms | |||
Directional angle | 3°–10° | |||
Detected object | transparent of opaque body | |||
Working environment temperature | –25℃～55℃ | |||
Intensity of illumination of working environment | Sunlight under 10000LX incandescent lamp under 3000LX | |||
Shell material | Metal | |||
Protection grade | IP54 | |||
Trough Beam Diffuse reflection Retroreflective 3m Proximity Photoelectric Sensor G13
Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver.
Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object.
Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light.
Structural category Photoelectric switch | ||||
Outward Appearance code | G13 | |||
Outward appearance illustration |
| |||
Diffuse Type | DETECTION DISTANCE | 10cm | ||
NPN | NO | G13-3A10NA | ||
DC | NC | G13-3A10NB | ||
10 | NO+NC | G13-3A10NC | ||
～ | PNP | NO | G13-3A10PA | |
30 | NC | G13-3A10PB | ||
V | NO+NC | G13-3A10PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Retro reflictive | DETECTION DISTANCE | 1m | ||
NPN | NO | G13-3B1NA | ||
DC | NC | G13-3B1NB | ||
10 | NO+NC | G13-3B1NC | ||
～ | PNP | NO | G13-3B1PA | |
30 | NC | G13-3B1PB | ||
V | NO+NC | G13-3B1PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
Trough beam | DETECTION DISTANCE | 3m | ||
NPN | NO | G13-3C3NA | ||
DC | NC | G13-3C3NB | ||
10 | NO+NC | G13-3C3NC | ||
～ | PNP | NO | G13-3C3PA | |
30 | NC | G13-3C3PB | ||
V | NO+NC | G13-3C3PC | ||
AC 90-250VAC | SCR | NO | ||
NC | ||||
Relay output | ||||
DC/SCR/Relay Control output | DC:200mA 、AC:300mA relay:2A | |||
DC/AC Consumption current | DC<15mA AC<10mA | |||
DC/AC Response time | DC<2ms AC<20ms | |||
Directional angle | 3°–10° | |||
Detected object | transparent of opaque body | |||
Working environment temperature | –25℃～55℃ | |||
Intensity of illumination of working environment | Sunlight under 10000LX incandescent lamp under 3000LX | |||
Shell material | Metal | |||
Protection grade | IP54 | |||
