 |
Inductive sensor is a device that uses the change of coil self inductance or mutual inductance coefficient to realize non electric quantity measurement. Inductive sensors can be used to measure displacement, pressure.
| Quantity: | |
|---|---|
Dc Proximity Sensor Plug Type M8 Mini Sensor Connector
Inductive proximity sensors enable the detection, without contact, of metalobjects at distances of up to 60 mm.Their range of applications is very extensive and includes: the monitoring of machine parts(cams, mechanical stops, etc. ) monitoring the flow of metal parts, counting, etc.
It has a series of advantages such as simple structure, high sensitivity, large output power, small output impedance, strong anti-interference ability and high measurement accuracy, so it is widely used in electromechanical control systems.
INDUCTIVE PROXIMITY SWITCH | ||||
Outward appearance code | LM8-££T | |||
Appearance | | |||
Dimension | | |||
Flush | Detection distance | 1mm | ||
NPN | NO | 3001NAT | ||
DC | NC | 3001NBT | ||
6 | NO+NC | |||
～ | PNP | NO | 3001PAT | |
36 | NC | 3001PBT | ||
V | NO+NC | |||
two wire system | NO | 3001LAT | ||
NC | 3001LBT | |||
AC | SRC Control label silicon | NO | ||
90 | NC | |||
～250 | NO+NC | |||
V | Relay output | |||
Non-flush | Detection distance | 2mm | ||
NPN | NO | 3002NAT | ||
NC | 3002NBT | |||
DC | NO+NC | |||
6 | PNP | NO | 3002PAT | |
～ | NC | 3002PBT | ||
36 | NO+NC | |||
V | two wire system | NO | 3002LAT | |
NC | 3002LBT | |||
AC | SRC Control label silicon | NO | 2002AT | |
90 | NC | |||
～250 | NO+NC | |||
V | Relay output | |||
Control output | DC | 150mA | ||
SCR/Relay | ||||
Output voltage dropDC/AC | DC<3V AC<10V | |||
Consumption current | DC<15mA AC<10mA | |||
Standard detected object | 8×8×1(A3 iron) | |||
Repeated precision | 0.01 | |||
DC/AC Response frequency | 500Hz/25Hz | |||
Working environment temperature | –25℃～75℃ | |||
Insulation resistance | ≥50MΩ | |||
Shell material | Metal | |||
Protection grade | IEC standard IP67 | |||
Dc Proximity Sensor Plug Type M8 Mini Sensor Connector
Inductive proximity sensors enable the detection, without contact, of metalobjects at distances of up to 60 mm.Their range of applications is very extensive and includes: the monitoring of machine parts(cams, mechanical stops, etc. ) monitoring the flow of metal parts, counting, etc.
It has a series of advantages such as simple structure, high sensitivity, large output power, small output impedance, strong anti-interference ability and high measurement accuracy, so it is widely used in electromechanical control systems.
INDUCTIVE PROXIMITY SWITCH | ||||
Outward appearance code | LM8-££T | |||
Appearance | | |||
Dimension | | |||
Flush | Detection distance | 1mm | ||
NPN | NO | 3001NAT | ||
DC | NC | 3001NBT | ||
6 | NO+NC | |||
～ | PNP | NO | 3001PAT | |
36 | NC | 3001PBT | ||
V | NO+NC | |||
two wire system | NO | 3001LAT | ||
NC | 3001LBT | |||
AC | SRC Control label silicon | NO | ||
90 | NC | |||
～250 | NO+NC | |||
V | Relay output | |||
Non-flush | Detection distance | 2mm | ||
NPN | NO | 3002NAT | ||
NC | 3002NBT | |||
DC | NO+NC | |||
6 | PNP | NO | 3002PAT | |
～ | NC | 3002PBT | ||
36 | NO+NC | |||
V | two wire system | NO | 3002LAT | |
NC | 3002LBT | |||
AC | SRC Control label silicon | NO | 2002AT | |
90 | NC | |||
～250 | NO+NC | |||
V | Relay output | |||
Control output | DC | 150mA | ||
SCR/Relay | ||||
Output voltage dropDC/AC | DC<3V AC<10V | |||
Consumption current | DC<15mA AC<10mA | |||
Standard detected object | 8×8×1(A3 iron) | |||
Repeated precision | 0.01 | |||
DC/AC Response frequency | 500Hz/25Hz | |||
Working environment temperature | –25℃～75℃ | |||
Insulation resistance | ≥50MΩ | |||
Shell material | Metal | |||
Protection grade | IEC standard IP67 | |||
