Inductive proximity switchs enable the detection, without contact, of metalobjects at distances of up to 60 mmTheir range of applications is very extensive and includes: the monitoring ofmachine parts(cams, mechanical stops, etc. ) monitoring the flow of metalparts, counting, etc.
INDUCTIVE PROXIMITY SWITCH | ||||
Structural category | Cylinder type | |||
Outward appearance code | LM480 | |||
Appearance | | |||
Dimension | | |||
Flush | Detection distance | |||
NPN | NO | |||
DC | NC | |||
6 | NO+NC | |||
～ | PNP | NO | ||
36 | NC | |||
V | NO+NC | |||
two wire system | NO | |||
NC | ||||
AC | SRC Control label silicon | NO | ||
90 | NC | |||
～250 | NO+NC | |||
V | Relay output | |||
Non-flush | Detection distance | 25mm | ||
NPN | NO | 3025NA | ||
NC | 3025NB | |||
DC | NO+NC | 3025NC | ||
6 | PNP | NO | 3025PA | |
～ | NC | 3025PB | ||
36 | NO+NC | 3025PC | ||
V | two wire system | NO | ||
NC | ||||
AC | SRC Control label silicon | NO | 2025A | |
90 | NC | 2025B | ||
～250 | NO+NC | 2025C | ||
V | Relay output | |||
Control output | DC | 200mA | ||
SCR/Relay | 300mA | |||
Output voltage dropDC/AC | DC<3V AC<10V | |||
Consumption current | DC<15mA AC<10mA | |||
Standard detected object | 50×50×1(A3 iron) | |||
Repeated precision | 0.1 | |||
DC/AC Response frequency | 100Hz/25Hz | |||
Working environment temperature | –25℃～75℃ | |||
Insulation resistance | 50MΩ | |||
Shell material | Metal | |||
Protection grade | IEC standard IP67 | |||
Altemative model at home and abroad | SFE-□□ | |||
content is empty!