Close
 
Product NamePanel Meter 1
Moving Iron Instruments AC Ammeters & AC Voltmeters
Model: TE-96 TE-72 TE-48
Accuracy: Class 1.5
Specification: 0.1A 0.5A 1A 7.5A 10A 15A 20A 25A 30A 40A 50A 60A 75A 100A For 5A-10KA use external current transformer with secondary current 5A and 1A.
Notes: For 60A,75A,100A meter. when these meters directly connected to circuit, their accuracy is class 2.5.For 20A-60A direct reading TE-48 meters, the accuracy is class 2.5.
Changeable scale: All scales with printing technique.The dial plate with different scale, which is at the same division and internal value, can be changeable.But the accuracy is unchangeable.
Specification: 30V 50V 75V 100V 120V 150V 120V 150V 200V 250V 450V 500V 600VFor 450-450KV,meters can use potential transformer with secondary voltage 100V.
Heat resistance: Case of non-combustible plastic material.
Fastening: By mans of nuts, absolutely safe, fast, robust, side-by-side.
Mounting depth: Max.43mm.
Heat resistance: Case of non-combustible plastic material.
Moving Coil Instruments(240DEG,90DEG) DC Ammeters & DC Voltmeters
Model: TE-96 TE-72 TE-48
Accuracy: Class 1.5
Specification: 0.1A 0.5A 1A 7.5A 10A 15A 20A 25A 30A 40A 50A 60A 75 A100A
For 5A-10KA use external current transformer with secondary current 5A and1A.
Notes: For 60A,75A,100A meter. when these meters directly connected to circuit, their accuracy is class 2.5.For 20A-60A direct reading TE-48 meters, the accuracy is class 2.5
Changeable scale: All scales with printing technique.The dial plate with different scale, which is at the same division and internal value, can be changeable.But the accuracy is unchangeable.
Specification: 30V 50V 75V 100V 120V 150V 120V 150V 200V 250V 450V 500V 600V For 450-450KV,meters can use potential transformer with secondary voltage 100V.
Heat resistance: Case of non-combustible plastic material.
Fastening: By mans of nuts, absolutely safe, fast, robust, side-by-side.
Mounting depth: Max.43mm.
Heat resistance: Case of non-combustible plastic material.
Moving Coil Instruments With Rectifier(240DEG,90DEG) AC Ammeters & AC Volmeters
Model: 90DEG: TE-L96 A TE-L72 A 240DEG: TE-L96A TE-L72A TE-L48A
Accuracy: Class 1.5
Specification: 0.5A 1A 1.5A 3A 5A 7.5A 10A 15A 20A.For10A-10KA use external current transformer.Which secondary current is 5A or 1A.
Notes: These meters measure r.m.s values and are scaled in r.m.s values.
Changeable scale: All scales with printing technique.The dial plate with different scale, which is at the same division and internal value, can be changeable.But the accuracy is unchangeable.
Specification: 3V 5V 7.5V 10V 15V 20V 30V 50V 100V 150V 200V 250V 300V 400V 450V 500V 600V.For 450-450KV,meters can use potential transformer with secondary voltage 100V.
Heat resistance: Case of non-combustible plastic material according to UL94V0.
Fastening: By mans of nuts, absolutely safe, fast, robust, side-by-side.
Mounting depth: Max.43mm.
Heat resistance: Case of non-combustible plastic material.
Moving Iron Voltmeter With Change Over Switch For AC Ammeters & AC Volmeters
Model: TE-Z96V TE-Z72V
The instrument are suitable for measuring AC Ampere in three phase 4 or 3 wire networks by using a change over switch on the front side of the instrument.
Measuring range: 0.1A / 1A 0.2A / 2A 0.3A / 3A 0.4A / 4A 0.5A / 5A 1A / 10A 5/ 5A
3 phase 3 wire Position: L1,L2
3 phase 4 wire Position: L1,L2,L3
Heat resistance: Case of non-combustible plastic material.
The instrument are suitable for measuring AC Ampere in three phase 4 or 3 wire networks by using a change over switch on the front side of the instrument.
Technical data: Movement: Moving-iron movement with oil filled bearings. practically vibration-free oil damping.
Accuracy: class 1.5
Frequency range: 50Hz.
3 phase 4 wire Measuring range: 60V/100V,80/150V,100/200V,150/250V,250/400V,300/500V.
Position: L1-L2,L1-L3,L2-L3,L1-N,L2-N,L3-N
3 phase 4 wire Measuring range: 100V,150V,200V,250V,400V,500V.
Position:L1-L2,L1-L3,L2-L3
Moving Coil Instruments Frequency Meters(240DEG,90DEG)
Accuracy: Class 1.0
Model: 90DEG:TE-F96 TE-F72 TE-F48
240DEG:TE-F96 TE-F72 CP-F48
Specification:
Voltage: 50V 100V 220V 380V 440V 415V
Frequency: 45-55Hz,45-65Hz,55-65Hz,47-53Hz,
57-63Hz,44-56Hz,54-66Hz,450-550Hz,450-650Hz,550-650Hz
Heat resistance: Case of non-combustible plastic material.
Fastening: By means of must, absolutely safe,fast,robust,side-by-side.
Mounting depth: Max 43mm
Frequency Meter With Reeds Types
One row of reeds model: TE-R96 TE-R72
Two rows of needs model: TE-2R96
Accuracy: Class 0.5
Specification:
Voltage: 50V 100V 200V 380V 440V 415V
Frequency: 45-55Hz,45-65Hz,55-65Hz,47-53Hz,
57-63Hz,44-56Hz,54-66Hz,450-550Hz,450-650Hz,550-650Hz
This vibrating reed frequency meter with one row of horizontal reeds or with two rows of horizontally arranged reeds for connection to one main voltage. Vertical arrangements on request
Heat resistance: case of non-combustible plastic material.
Changeable scale: All scales with printing technique.
The dial plate with different scale, which is at the same internal value, can be changeable. But the accuracy is unchangeable.
Fastening: By means of nuts, absolutely safe,fast,robust.side-by-side
Mounting depth: Max -43mm .
Moving Coil Instruments Power Factor Meter(240DEG,90DEG)
Model: 90DEG: TE-PF96 TE-PF80 TE-PF72 TE-PF48
240DEG: TE-PF96 TE-PF72 TE-PF48
Accuracy: Class 2.5
Voltage: 100V 220V 380V 415V 440V/current: 1 A or 5A
Specification: 0.5cap-1-0.5ind,0.3cap-1-0.1ind,0.4cap-1-0.4ind,0.7cap-1-0.2ind
Heat resistance: Case of non-combustible plastic material.
Frequency: 50Hz or 60Hz.
Fastening: By means of must, absolutely safe,fast,robust,side-by-side.
Mounting depth: Max 43mm .
Moving Coil Instruments Power Meter(240 DEG,90 DEG)
Wattmetr Model:
90DEG: TE-W96 TE-W80 TE-W72 TE-W48
240DEGTE-W96 TE-W72 TE-W48
Varmeter Model:
90DEG: TE-Var96 TE-Var80 TE-Var72 TE-Var48
240DEG: TE-Var96 TE-Var72 TE-Var48
Accuracy: Class 1.5
Specification:
Voltage: Single phase: 100V 220V 380V
Three phase three wire: 100V 220V 380V 415V
Three phase four wire: 100V 220(380)V 240(415)V
Above-mentioned can be connected directly. The following should be connected with voltage transformers:380/100V 500/100V 3K/100V 6K/100V 10K/100V 15K/100V 15K/100V 35K/100V
Current: 1A , 5A
The voltage circuits of the meter connected with voltage transformers of secondary voltage 100V., if the secondary voltage is lower than 450V,it also can be connected directly. The current circuits connected with current transformers. which secondary current is 5A or 1A .Wattmeters and Varmeters with converter for three-phase three wires or four wire and single phase. which can be used for balance and unbalance burder circuit.
Heat resistance: Case of non-combustible plastic material.
Fastening: By means of must,absolutely safe,fast,robust.side-by-side
Mounting depth: Max 43mm.
Synchroscope Meters
Synchrony scope for phase comparison for phase AC circuits. 50Hz or 60Hz
Model: TE-S96 TE-S72
Specification:
Voltage: 100V 220V 380V 440V
Working time: 15 min max.
Sequence Indicator
This indicator is designed for easy testing of phase sequence in three-phase system with a permissible operating voltage up to 500V. For short connections, not longer than 5 minutes for one test, a push-button switch is placed on the front plate. A disc with an indicating arrow rotates in the direction of the arrow. If the three phases are properly connected,. Otherwise the disc rotates in the other direction. By changing of two wires. The phase sequence will be corrected to corresponding designation of terminals.
Model: TE-SI69 TE-SI72
Specification:
Voltage: 110-500V
Working time: not longer than 5 minutes.
Elapsed Time Meter Or Hours Run Meters
Model: TE-H96 TE-H72 TE-H48
Display: 99999.99
Voltage: AC 10-125V AC 200-250V AC 380-440V AC 24V
Burden: 2.5VA
Frequency: 50/60Hz
Features: Elasped Time Meters or Hours Run Meters monitor ON/RUN time of plant and equipment allowing the user to perform functions such as Production Efficiency Cost Estimating and Service Period Monitor-ink for preventatives maintenance etc. The time is measured in instrument of 0.01h up to 99999.99 hours after which time the meter resets to zero. Non-reset table to prevent accidental resetting.
Double Voltmeters
Model: TE-2T96-V TE-2T72-V
TE -2L 96-V TE -2L 72-V
Specification: 0-100V 0-300V 0-500V
Heat resistance: Case of non-combustible plastic material.
Fastening: By means of nuts. absolutely safe,fast,robust,side-by-side.
Mounting depth: Max 43mm .
Moving Iron Instrunment AC Ammmeters For Explosive Gas Atmospheres (Increased Safety "e")
Model: TE-E96 TE-E 72A TE-E 48A
Accuracy: Class 1.5,2.5
Marking: EExe T6
Specification: AC 100Ma, 1A , 5A.For 5A -10KA meters have to use external transformer with secondary current 1A , 5A .
Frequency: 50/60Hz Consumption: 0.2VA
Heat resistance: Case of non-combustible plastic material.
Changeable scale: All scales with printing technique.
The dial plate with different scale, which is at the same division and internal value, can be changeable.
But the accuracy is unchangeable.
Combined With Moving Iron Ammeters
For measuring mean maximum content value and instantaneous values for combined with moving iron movement meters.
Model : TE -2M 96,TE -2M 72
Accuracy: Class3.0(instantaneous values)Class 1.5
Specification: 8min 5A ,15min 5A ,8min 1A ,15min 1A
With bimetal movement and thermal delayed indictor for measuring the maximum mean load during a period of 8 of 15 minutes, eats red maximum pointer. Lead seal can protect resetting knob of maximum pointer. Scale compressed at the beginning. Convenient reading from 25% of full-scale deflection. Accuracy of maximum load indication 3%.
Referred to the maximum pointer. Response time 8 or 15,30 minutes(to be specified when ordering).
Heat resistance: Case of non-combustible plastic material.
Changeable scale: All scales with printing technique. The dial plate with different scale, which is at the same internal value. Can be changeable. But the accuracy is unchangeable.
Fastening: By means of nuts, absolutely safe,fast,robust,side-by-side.
Mounting depth: Max 43 mm .
Maximum Demand Ammeter
For measuring mean maximum current value, when it is 8 min or 15 min or 30 min.
Model: TE-M96 TE-M72 TE-M48
Accuracy: Class3.0
Specification: 8min 5A ,15min 5A ,8min 1A ,30min 5A
8min 1A ,15min 1A (No specification for 30 min 5A for TE-M48)
With bimetal movement and thermal delayed indictor for measuring the maximum mean load during a period of 8 of 15 minutes, eats red maximum pointer. Lead seal can protect resetting knob of maximum pointer. Scale compressed at the beginning. Convenient reading from 25% of full-scale deflection. Accuracy of maximum load indication 3%..
Referred to the maximum pointer. Response time 8 or 15,30 minutes(to be specified when ordering).
Heat resistance: Case of non-combustible plastic material.
Changeable scale: All scales with printing technique. The dial plate with different scale ,which is at the same internal value. Can be changeable. But the accuracy is unchangeable.
Fastening: By means of nuts, absolutely safe,fast,robust,side-by-side.
Mounting depth: Max 43 mm.
Maximum Demand Indicator With Relay
Model: TE-AM96 TE-AM72
Features: For the control of Maximum Demand and the monitoring and control of overload on distribution systems. Constructed with an electronic circuit and 5A relay. The alarm was set by the blue slim pointer, the red light is the alarm one, which can be used with buzzer.
Accuracy: Class 3.0
Rating: 1A , 5A for use with separate CT.
Burden: MD12.2VA Frequency: 50/60Hz
Overload: 1.2 continuous, 101 second,201 second via5/5 CT.
Relay circuit
Auxiliary: AC 220V 10%,50/60Hz Burden:2.6VA Bestrews:<1%
Time delay: 1 second approximately fixed. Alarm and Trip point
Working Range : 20-100% 1% added to the MDI Accuracy
Relay: Single Pole Changeover
Relay: Rating: AC 250V 5A non inductive, DC 24V 2A Resistive
Temperature: -10 to + 50 .